• 产品概括
  • 技术规格

 

美国hausser scientific细胞记数板 货号3556

The Speirs-Levy Eosinophil counting slide is designed primarily for doing direct eosinphil counts in blood, but is readily adaptable for performing cell counts in spinal fluids or other media in which cells are suspended. It is especially useful in clinics and laboratories where large number of blood cell determinations must be performed quickly.

 

The Speirs-Levy slide has the following characteristics which facilitate loading and counting:

 

    1. There are 4 chambers per slide

 

    2. Each chamber consists of ten 1 x 1mm squares which are subdivided into 16 smaller areas.

 

    3. The depth of each chamber is 0.2 mm.

 

    4. The chambers are spaced on the left hand side of the slide for ease of handling and to prevent accidental reversing of the slide.

 

    5. An identification number is engraved on the right hand side of each chamber and will appear on the left hand side when viewed through the microscope. This number helps focusing and may be used to determine the beginning and end of a chamber count.

 

    6. The outer edge of each chamber is inclined 7 degrees to aid in proper charging of the chamber and to act as a reservoir to replace any fluid that might evaporate before the slide is counted.

 

 

Photograph of 3556

Catalog # Description

3556         Counting Chamber w/2 cover glass

5020         Replacement Cover Glass

Directions for Use

Speirs-Levy - Catalog Number: 3556

 

 

美国hausser scientific细胞记数板 货号3556

The Speirs-Levy Eosinophil counting slide is designed primarily for doing direct eosinphil counts in blood, but is readily adaptable for performing cell counts in spinal fluids or other media in which cells are suspended. It is especially useful in clinics and laboratories where large number of blood cell determinations must be performed quickly.

 

The Speirs-Levy slide has the following characteristics which facilitate loading and counting:

 

    1. There are 4 chambers per slide

 

    2. Each chamber consists of ten 1 x 1mm squares which are subdivided into 16 smaller areas.

 

    3. The depth of each chamber is 0.2 mm.

 

    4. The chambers are spaced on the left hand side of the slide for ease of handling and to prevent accidental reversing of the slide.

 

    5. An identification number is engraved on the right hand side of each chamber and will appear on the left hand side when viewed through the microscope. This number helps focusing and may be used to determine the beginning and end of a chamber count.

 

    6. The outer edge of each chamber is inclined 7 degrees to aid in proper charging of the chamber and to act as a reservoir to replace any fluid that might evaporate before the slide is counted.

 

 

Photograph of 3556

Catalog # Description

3556         Counting Chamber w/2 cover glass

5020         Replacement Cover Glass

Directions for Use

Speirs-Levy - Catalog Number: 3556